From a661c386fe4d9f123adc2c29b41d8dbd088720f6 Mon Sep 17 00:00:00 2001 From: Dan Date: Mon, 28 Jul 2025 23:48:04 +0000 Subject: [PATCH] docs: create screenPrinting/PreparingToPrint --- screenPrinting/PreparingToPrint.md | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 screenPrinting/PreparingToPrint.md diff --git a/screenPrinting/PreparingToPrint.md b/screenPrinting/PreparingToPrint.md new file mode 100644 index 0000000..c3aa858 --- /dev/null +++ b/screenPrinting/PreparingToPrint.md @@ -0,0 +1,23 @@ +--- +title: Preparing To Print +description: Steps to be Taken When Loading a Job For Print +published: true +date: 2025-07-28T23:47:48.889Z +tags: workshop, screenprinting +editor: markdown +dateCreated: 2025-07-28T23:47:48.889Z +--- + +# Prepaing To Print + +## Steps when preparing to print job +1. Make sure off contact is properly set +2. Make sure all bolts are tightened +3. Line up postive on platten in the location you wish to print +4. Insert Screen into holder. Do not tighten down all the way +5. Line up screen with negative on platten and tighten while holding screen down +6. Tape down registration points +7. Remove postivie +8. Make sure platten is tacky but not too sticky +9. Tape screen: edges and any registration marks you don't want on final print +10. Load Ink