diff --git a/screenPrinting/PreparingToPrint.md b/screenPrinting/PreparingToPrint.md
new file mode 100644
index 0000000..c3aa858
--- /dev/null
+++ b/screenPrinting/PreparingToPrint.md
@@ -0,0 +1,23 @@
+---
+title: Preparing To Print
+description: Steps to be Taken When Loading a Job For Print
+published: true
+date: 2025-07-28T23:47:48.889Z
+tags: workshop, screenprinting
+editor: markdown
+dateCreated: 2025-07-28T23:47:48.889Z
+---
+
+# Prepaing To Print
+
+## Steps when preparing to print job
+1. Make sure off contact is properly set
+2. Make sure all bolts are tightened
+3. Line up postive on platten in the location you wish to print
+4. Insert Screen into holder. Do not tighten down all the way
+5. Line up screen with negative on platten and tighten while holding screen down
+6. Tape down registration points
+7. Remove postivie
+8. Make sure platten is tacky but not too sticky
+9. Tape screen: edges and any registration marks you don't want on final print
+10. Load Ink