From 1a742bd6771d55a0b645477a813c0b6c7aeedd87 Mon Sep 17 00:00:00 2001 From: dan Date: Wed, 15 Dec 2021 23:24:40 -0500 Subject: [PATCH] docs: create 3dPrinting/Klipper/Bed_Leveling --- 3dPrinting/Klipper/Bed_Leveling.md | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 3dPrinting/Klipper/Bed_Leveling.md diff --git a/3dPrinting/Klipper/Bed_Leveling.md b/3dPrinting/Klipper/Bed_Leveling.md new file mode 100644 index 0000000..d779d43 --- /dev/null +++ b/3dPrinting/Klipper/Bed_Leveling.md @@ -0,0 +1,19 @@ +--- +title: Bed Leveling +description: +published: 1 +date: 2021-12-16T04:24:33.646Z +tags: +editor: markdown +dateCreated: 2021-12-16T04:24:33.646Z +--- + +# Bed Leveling +## PROBE CALIBRATE +- Probe Calibrate should be run first. +- TESTZ Z=-1 will lower the head 1mm, etc. +- Accept to accept the changes +- SAVE_CONFIG to save the offset to the printer config file + +## Bed Leveling +There is a bed leveling macro setup that will heat up the bed/extruder and run the bed_mesh saving the result to profile ender3 \ No newline at end of file