diff --git a/printer.cfg b/printer.cfg
index 68192a6..821a88b 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -305,22 +305,25 @@ gcode:
 	M140 S{ params.BED_TEMP } ; set bed temp
 	#G1 Z20 ; this is a good start heating position
 
-	M84 ; disable motors
 	M190 S{ params.BED_TEMP } ; wait for bed temp
-	M109 S{ params.TOOL_TEMP } ; wait for extruder temp
+	M109 S170 ; wait for extruder temp
 
 	; Start of print
 	G21; metric values
 	G90 ; absolute positioning
 	M82; set extruder to absolute mode
 
-	G28;
-	G29;
+	G28; home
+	G29; mesh level
 
 	G1 X5.0 Y5.0 F7200 ; Move to a position in the left front of the bed
-	G1 Z0.6; Move nozzle above 0.6 mm of the bed
+	G1 Z10; Move nozzle above 10 mm of the bed
 	
-	M104 S{ params.TOOL_TEMP } ; set extruder temp
+
+	M190 S{ params.BED_TEMP } ; wait for bed temp
+	M109 S{ params.TOOL_TEMP } ; wait for extruder tem
+	
+	G1 Z.6; Move nozzle above 0.6 mm of the bed
 	
 	; Prepare nozzle
 	G92 E0 ; Set extrusion distance to 0