/* PWM Demo with serial control over three LEDs */

// ------- Preamble -------- //
#include <avr/io.h>                        /* Defines pins, ports, etc */
#include <util/delay.h>                     /* Functions to waste time */
#include "pinDefines.h"
#include "USART.h"

static inline void initTimers(void) {
  // Timer 1 A,B
  TCCR1A |= (1 << WGM10);                      /* Fast PWM mode, 8-bit */
  TCCR1B |= (1 << WGM12);                       /* Fast PWM mode, pt.2 */
  TCCR1B |= (1 << CS11);                     /* PWM Freq = F_CPU/8/256 */
  TCCR1A |= (1 << COM1A1);                      /* PWM output on OCR1A */
  TCCR1A |= (1 << COM1B1);                      /* PWM output on OCR1B */

  // Timer 2
  TCCR2A |= (1 << WGM20);                             /* Fast PWM mode */
  TCCR2A |= (1 << WGM21);                       /* Fast PWM mode, pt.2 */
  TCCR2B |= (1 << CS21);                     /* PWM Freq = F_CPU/8/256 */
  TCCR2A |= (1 << COM2A1);                      /* PWM output on OCR2A */
}

int main(void) {

  uint8_t brightness;

  // -------- Inits --------- //

  initTimers();
  initUSART();
  printString("-- LED PWM Demo --\r\n");

               /* enable output on LED pins, triggered by PWM hardware */
  LED_DDR |= (1 << LED1);
  LED_DDR |= (1 << LED2);
  LED_DDR |= (1 << LED3);

  // ------ Event loop ------ //
  while (1) {

    printString("\r\nEnter (0-255) for PWM duty cycle: ");
    brightness = getNumber();
    OCR2A = OCR1B;
    OCR1B = OCR1A;
    OCR1A = brightness;

  }                                                  /* End event loop */
  return 0;                            /* This line is never reached */
}