// ------- Preamble -------- //
#include <avr/io.h>		/* Defines pins, ports, etc */
#include <util/delay.h>		/* Functions to waste time */
#include <avr/interrupt.h>	
#include <avr/power.h>
#include "pinDefines.h"
#include "macros.h"
#include "fullSaw15.h"

#define BASEPITCH       220 /* in tuningWord steps, which are ~1/2 Hz */
#define PHASE_RATE      7   /* controls speed of phasing effect */

#define NUMBER_OSCILLATORS  4
/* 2 and 4 work just fine.
   8 and 16 take too long to maintain our 31.25kHz sample rate
   so the pitch shifts downwards and there's all sorts of aliasing.  
   If you're just after scary sounds, 8 and 16 are awesome, but you may want 
   to increase the BASEPITCH to compensate. */

#define  OSCILLATOR_SHIFT   2
/* This is the number of bits to shift when volume mixing. 
   2**OSCILLATOR_SHIFT = NUMBER_OSCILLATORS 
   If you don't change this to match the number of oscillators, you'll
   get clipping and digital distortion.  */


static inline void initTimer0(void){
  set_bit(TCCR0A, WGM00);	/* Fast PWM mode */
  set_bit(TCCR0A, WGM01);	/* Fast PWM mode */

  set_bit(TCCR0A, COM0A1);	/* PWM output on OCR0A */
  set_bit(SPEAKER_DDR, SPEAKER); /* enable output on pin */

  set_bit(TCCR0B, CS00);	/* Clock with /1 prescaler */
}