/* Quasi-realtime-clock with servo sundial. */

// ------- Includes -------- //
#include <avr/io.h>
#include <util/delay.h>
#include <avr/interrupt.h>
#include <avr/power.h>
#include "pinDefines.h"
#include "USART.h"

// Global variables that take care of clock
extern volatile uint16_t ticks;
extern volatile uint8_t hours;                 /* arbitrary default time */
extern volatile uint8_t minutes;
extern volatile uint8_t seconds;

// ------- Defines -------- //
#define PULSE_MIN         1000         /* experiment with these values */
#define PULSE_MAX         2000              /* to match your own servo */
#define PULSE_RANGE       (PULSE_MAX - PULSE_MIN)
#define PULSE_OVER        3000        /* Must be larger than PULSE_MAX */

#define START_TIME        10                                  /* 10 am */
#define STOP_TIME     22                                      /* 10 pm */
#define HOURS_RANGE        (STOP_TIME - START_TIME - 1)

#define LASER             PB2
#define LASER_PORT        PORTB
#define LASER_DDR         DDRB

#define SERVO             PB1
#define SERVO_PORT        PORTB
#define SERVO_DDR         DDRB

#define OVERFLOWS_PER_SECOND   31250      /* nominal, should calibrate */


// Serial input and output functions
void pollSerial(void);
void printTime(uint8_t hours, uint8_t minutes, uint8_t seconds);

// Servo setup and utility functions
void initTimer1_Servo(void);
void enableServo(void);
void disableServo(void);
void setServoPosition(void);

// Realtime-clock handling functions
// Use the globals ticks, hours, minutes, seconds
void initTimer0_Clock(void);
void everyHour(void);
void everyMinute(void);
void everySecond(void);