/* Reads LM75 Thermometer and Prints Value over Serial */

// ------- Preamble -------- //
#include <avr/io.h>
#include <util/delay.h>
#include <avr/power.h>

#include "pinDefines.h"
#include "USART.h"
#include "i2c.h"

// -------- Defines -------- //

#define LM75_ADDRESS_W               0b10010000
#define LM75_ADDRESS_R               0b10010001
#define LM75_TEMP_REGISTER           0b00000000
#define LM75_CONFIG_REGISTER         0b00000001
#define LM75_THYST_REGISTER          0b00000010
#define LM75_TOS_REGISTER            0b00000011
// -------- Functions --------- //

int main(void) {

  uint8_t tempHighByte, tempLowByte;

  // -------- Inits --------- //
  clock_prescale_set(clock_div_1);                             /* 8MHz */
  initUSART();
  printString("\r\n====  i2c Thermometer  ====\r\n");
  initI2C();

  // ------ Event loop ------ //
  while (1) {
                        /* To set register, address LM75 in write mode */
    i2cStart();
    i2cSend(LM75_ADDRESS_W);
    i2cSend(LM75_TEMP_REGISTER);
    i2cStart();                      /* restart, just send start again */
                              /* Setup and send address, with read bit */
    i2cSend(LM75_ADDRESS_R);
                               /* Now receive two bytes of temperature */
    tempHighByte = i2cReadAck();
    tempLowByte = i2cReadNoAck();
    i2cStop();

    // Print it out nicely over serial for now...
    printByte(tempHighByte);
    if (tempLowByte & _BV(7)) {
      printString(".5\r\n");
    }
    else {
      printString(".0\r\n");
    }

                                                    /* Once per second */
    _delay_ms(1000);

  }                                                  /* End event loop */
  return 0;                            /* This line is never reached */
}