Started following some tutorial on att85 usi. Downloaded example code from make avr book.
This commit is contained in:
Dan
@@ -0,0 +1,196 @@
|
||||
|
||||
##########------------------------------------------------------##########
|
||||
########## Project-specific Details ##########
|
||||
########## Check these every time you start a new project ##########
|
||||
##########------------------------------------------------------##########
|
||||
|
||||
MCU = atmega168p
|
||||
F_CPU = 8000000UL
|
||||
BAUD = 9600UL
|
||||
## Also try BAUD = 19200 or 38400 if you're feeling lucky.
|
||||
|
||||
## A directory for common include files and the simple USART library.
|
||||
## If you move either the current folder or the Library folder, you'll
|
||||
## need to change this path to match.
|
||||
LIBDIR = ../../AVR-Programming-Library
|
||||
|
||||
##########------------------------------------------------------##########
|
||||
########## Programmer Defaults ##########
|
||||
########## Set up once, then forget about it ##########
|
||||
########## (Can override. See bottom of file.) ##########
|
||||
##########------------------------------------------------------##########
|
||||
|
||||
PROGRAMMER_TYPE = usbtiny
|
||||
# extra arguments to avrdude: baud rate, chip type, -F flag, etc.
|
||||
PROGRAMMER_ARGS =
|
||||
|
||||
##########------------------------------------------------------##########
|
||||
########## Program Locations ##########
|
||||
########## Won't need to change if they're in your PATH ##########
|
||||
##########------------------------------------------------------##########
|
||||
|
||||
CC = avr-gcc
|
||||
OBJCOPY = avr-objcopy
|
||||
OBJDUMP = avr-objdump
|
||||
AVRSIZE = avr-size
|
||||
AVRDUDE = avrdude
|
||||
|
||||
##########------------------------------------------------------##########
|
||||
########## Makefile Magic! ##########
|
||||
########## Summary: ##########
|
||||
########## We want a .hex file ##########
|
||||
########## Compile source files into .elf ##########
|
||||
########## Convert .elf file into .hex ##########
|
||||
########## You shouldn't need to edit below. ##########
|
||||
##########------------------------------------------------------##########
|
||||
|
||||
## The name of your project (without the .c)
|
||||
# TARGET = blinkLED
|
||||
## Or name it automatically after the enclosing directory
|
||||
TARGET = $(lastword $(subst /, ,$(CURDIR)))
|
||||
|
||||
# Object files: will find all .c/.h files in current directory
|
||||
# and in LIBDIR. If you have any other (sub-)directories with code,
|
||||
# you can add them in to SOURCES below in the wildcard statement.
|
||||
SOURCES=$(wildcard *.c $(LIBDIR)/*.c)
|
||||
OBJECTS=$(SOURCES:.c=.o)
|
||||
HEADERS=$(SOURCES:.c=.h)
|
||||
|
||||
## Compilation options, type man avr-gcc if you're curious.
|
||||
CPPFLAGS = -DF_CPU=$(F_CPU) -DBAUD=$(BAUD) -I. -I$(LIBDIR)
|
||||
CFLAGS = -Os -g -std=gnu99 -Wall
|
||||
## Use short (8-bit) data types
|
||||
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
|
||||
## Splits up object files per function
|
||||
CFLAGS += -ffunction-sections -fdata-sections
|
||||
LDFLAGS = -Wl,-Map,$(TARGET).map
|
||||
## Optional, but often ends up with smaller code
|
||||
LDFLAGS += -Wl,--gc-sections
|
||||
## Relax shrinks code even more, but makes disassembly messy
|
||||
## LDFLAGS += -Wl,--relax
|
||||
## LDFLAGS += -Wl,-u,vfprintf -lprintf_flt -lm ## for floating-point printf
|
||||
## LDFLAGS += -Wl,-u,vfprintf -lprintf_min ## for smaller printf
|
||||
TARGET_ARCH = -mmcu=$(MCU)
|
||||
|
||||
## Explicit pattern rules:
|
||||
## To make .o files from .c files
|
||||
%.o: %.c $(HEADERS) Makefile
|
||||
$(CC) $(CFLAGS) $(CPPFLAGS) $(TARGET_ARCH) -c -o $@ $<;
|
||||
|
||||
$(TARGET).elf: $(OBJECTS)
|
||||
$(CC) $(LDFLAGS) $(TARGET_ARCH) $^ $(LDLIBS) -o $@
|
||||
|
||||
%.hex: %.elf
|
||||
$(OBJCOPY) -j .text -j .data -O ihex $< $@
|
||||
|
||||
%.eeprom: %.elf
|
||||
$(OBJCOPY) -j .eeprom --change-section-lma .eeprom=0 -O ihex $< $@
|
||||
|
||||
%.lst: %.elf
|
||||
$(OBJDUMP) -S $< > $@
|
||||
|
||||
## These targets don't have files named after them
|
||||
.PHONY: all disassemble disasm eeprom size clean squeaky_clean flash fuses
|
||||
|
||||
all: $(TARGET).hex
|
||||
|
||||
debug:
|
||||
@echo
|
||||
@echo "Source files:" $(SOURCES)
|
||||
@echo "MCU, F_CPU, BAUD:" $(MCU), $(F_CPU), $(BAUD)
|
||||
@echo
|
||||
|
||||
# Optionally create listing file from .elf
|
||||
# This creates approximate assembly-language equivalent of your code.
|
||||
# Useful for debugging time-sensitive bits,
|
||||
# or making sure the compiler does what you want.
|
||||
disassemble: $(TARGET).lst
|
||||
|
||||
disasm: disassemble
|
||||
|
||||
# Optionally show how big the resulting program is
|
||||
size: $(TARGET).elf
|
||||
$(AVRSIZE) -C --mcu=$(MCU) $(TARGET).elf
|
||||
|
||||
clean:
|
||||
rm -f $(TARGET).elf $(TARGET).hex $(TARGET).obj \
|
||||
$(TARGET).o $(TARGET).d $(TARGET).eep $(TARGET).lst \
|
||||
$(TARGET).lss $(TARGET).sym $(TARGET).map $(TARGET)~ \
|
||||
$(TARGET).eeprom
|
||||
|
||||
squeaky_clean:
|
||||
rm -f *.elf *.hex *.obj *.o *.d *.eep *.lst *.lss *.sym *.map *~ *.eeprom
|
||||
|
||||
##########------------------------------------------------------##########
|
||||
########## Programmer-specific details ##########
|
||||
########## Flashing code to AVR using avrdude ##########
|
||||
##########------------------------------------------------------##########
|
||||
|
||||
flash: $(TARGET).hex
|
||||
$(AVRDUDE) -c $(PROGRAMMER_TYPE) -p $(MCU) $(PROGRAMMER_ARGS) -U flash:w:$<
|
||||
|
||||
## An alias
|
||||
program: flash
|
||||
|
||||
flash_eeprom: $(TARGET).eeprom
|
||||
$(AVRDUDE) -c $(PROGRAMMER_TYPE) -p $(MCU) $(PROGRAMMER_ARGS) -U eeprom:w:$<
|
||||
|
||||
avrdude_terminal:
|
||||
$(AVRDUDE) -c $(PROGRAMMER_TYPE) -p $(MCU) $(PROGRAMMER_ARGS) -nt
|
||||
|
||||
## If you've got multiple programmers that you use,
|
||||
## you can define them here so that it's easy to switch.
|
||||
## To invoke, use something like `make flash_arduinoISP`
|
||||
flash_usbtiny: PROGRAMMER_TYPE = usbtiny
|
||||
flash_usbtiny: PROGRAMMER_ARGS = # USBTiny works with no further arguments
|
||||
flash_usbtiny: flash
|
||||
|
||||
flash_usbasp: PROGRAMMER_TYPE = usbasp
|
||||
flash_usbasp: PROGRAMMER_ARGS = # USBasp works with no further arguments
|
||||
flash_usbasp: flash
|
||||
|
||||
flash_arduinoISP: PROGRAMMER_TYPE = avrisp
|
||||
flash_arduinoISP: PROGRAMMER_ARGS = -b 19200 -P /dev/ttyACM0
|
||||
## (for windows) flash_arduinoISP: PROGRAMMER_ARGS = -b 19200 -P com5
|
||||
flash_arduinoISP: flash
|
||||
|
||||
flash_109: PROGRAMMER_TYPE = avr109
|
||||
flash_109: PROGRAMMER_ARGS = -b 9600 -P /dev/ttyUSB0
|
||||
flash_109: flash
|
||||
|
||||
##########------------------------------------------------------##########
|
||||
########## Fuse settings and suitable defaults ##########
|
||||
##########------------------------------------------------------##########
|
||||
|
||||
## Mega 48, 88, 168, 328 default values
|
||||
LFUSE = 0x62
|
||||
HFUSE = 0xdf
|
||||
EFUSE = 0x00
|
||||
|
||||
## Generic
|
||||
FUSE_STRING = -U lfuse:w:$(LFUSE):m -U hfuse:w:$(HFUSE):m -U efuse:w:$(EFUSE):m
|
||||
|
||||
fuses:
|
||||
$(AVRDUDE) -c $(PROGRAMMER_TYPE) -p $(MCU) \
|
||||
$(PROGRAMMER_ARGS) $(FUSE_STRING)
|
||||
show_fuses:
|
||||
$(AVRDUDE) -c $(PROGRAMMER_TYPE) -p $(MCU) $(PROGRAMMER_ARGS) -nv
|
||||
|
||||
## Called with no extra definitions, sets to defaults
|
||||
set_default_fuses: FUSE_STRING = -U lfuse:w:$(LFUSE):m -U hfuse:w:$(HFUSE):m -U efuse:w:$(EFUSE):m
|
||||
set_default_fuses: fuses
|
||||
|
||||
## Set the fuse byte for full-speed mode
|
||||
## Note: can also be set in firmware for modern chips
|
||||
set_fast_fuse: LFUSE = 0xE2
|
||||
set_fast_fuse: FUSE_STRING = -U lfuse:w:$(LFUSE):m
|
||||
set_fast_fuse: fuses
|
||||
|
||||
## Set the EESAVE fuse byte to preserve EEPROM across flashes
|
||||
set_eeprom_save_fuse: HFUSE = 0xD7
|
||||
set_eeprom_save_fuse: FUSE_STRING = -U hfuse:w:$(HFUSE):m
|
||||
set_eeprom_save_fuse: fuses
|
||||
|
||||
## Clear the EESAVE fuse byte
|
||||
clear_eeprom_save_fuse: FUSE_STRING = -U hfuse:w:$(HFUSE):m
|
||||
clear_eeprom_save_fuse: fuses
|
||||
@@ -0,0 +1,67 @@
|
||||
/*
|
||||
Capacitive touch sensor demo
|
||||
*/
|
||||
|
||||
#include <avr/io.h>
|
||||
#include <util/delay.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include <avr/power.h>
|
||||
#include "pinDefines.h"
|
||||
#include "USART.h"
|
||||
|
||||
#define SENSE_TIME 50
|
||||
#define THRESHOLD 12000
|
||||
|
||||
// ------- Global Variables ---------- //
|
||||
volatile uint16_t chargeCycleCount;
|
||||
|
||||
// ------- Functions -------- //
|
||||
|
||||
void initPinChangeInterrupt(void) {
|
||||
PCICR |= (1 << PCIE1); /* enable Pin-change interrupts 1 (bank C) */
|
||||
PCMSK1 |= (1 << PC1); /* enable specific interrupt for our pin PC1 */
|
||||
}
|
||||
|
||||
ISR(PCINT1_vect) {
|
||||
chargeCycleCount++; /* count this change */
|
||||
|
||||
CAP_SENSOR_DDR |= (1 << CAP_SENSOR); /* output mode */
|
||||
_delay_us(1); /* charging delay */
|
||||
|
||||
CAP_SENSOR_DDR &= ~(1 << CAP_SENSOR); /* set as input */
|
||||
PCIFR |= (1 << PCIF1); /* clear the pin-change interrupt */
|
||||
}
|
||||
|
||||
|
||||
int main(void) {
|
||||
// -------- Inits --------- //
|
||||
clock_prescale_set(clock_div_1); /* full speed */
|
||||
initUSART();
|
||||
printString("==[ Cap Sensor ]==\r\n\r\n");
|
||||
|
||||
LED_DDR = 0xff;
|
||||
MCUCR |= (1 << PUD); /* disable all pullups */
|
||||
CAP_SENSOR_PORT |= (1 << CAP_SENSOR); /* we can leave output high */
|
||||
|
||||
initPinChangeInterrupt();
|
||||
|
||||
// ------ Event loop ------ //
|
||||
while (1) {
|
||||
|
||||
chargeCycleCount = 0; /* reset counter */
|
||||
CAP_SENSOR_DDR |= (1 << CAP_SENSOR); /* start with cap charged */
|
||||
sei(); /* start up interrupts, counting */
|
||||
_delay_ms(SENSE_TIME);
|
||||
cli(); /* done */
|
||||
if (chargeCycleCount < THRESHOLD) {
|
||||
LED_PORT = 0xff;
|
||||
}
|
||||
else {
|
||||
LED_PORT = 0;
|
||||
}
|
||||
printWord(chargeCycleCount); /* for fine tuning */
|
||||
printString("\r\n");
|
||||
|
||||
} /* End event loop */
|
||||
return 0; /* This line is never reached */
|
||||
}
|
||||
@@ -0,0 +1,35 @@
|
||||
import serial
|
||||
|
||||
def readValue(serialPort):
|
||||
return(ord(serialPort.read(1)))
|
||||
|
||||
def plotValue(value):
|
||||
""" Displays the value on a scaled scrolling bargraph"""
|
||||
leadingSpaces = "-" * int(value*(SCREEN_WIDTH-3) / 255)
|
||||
print(f"{leadingSpaces} {value:03}")
|
||||
|
||||
def cheapoScope(serialPort):
|
||||
while(1):
|
||||
newValue = readValue(serialPort)
|
||||
plotValue(newValue)
|
||||
|
||||
|
||||
if __name__ == "__main__":
|
||||
## list all serial ports being used: python -m serial.tools.list_ports
|
||||
PORT = '/dev/ttyUSB0' # update to whatever port is listed in serial.tools.list_ports
|
||||
BAUDRATE = 9600
|
||||
TIMEOUT = None
|
||||
SCREEN_WIDTH = 80
|
||||
|
||||
## Take command-line arguments to override defaults above
|
||||
import sys
|
||||
if len(sys.argv) == 3:
|
||||
port = sys.argv[1]
|
||||
baudrate = int(sys.argv[2])
|
||||
else: # nothing passed, use defaults
|
||||
print ("Optional arguments port, baudrate set to defaults.")
|
||||
port, baudrate = (PORT, BAUDRATE)
|
||||
|
||||
serialPort = serial.Serial(port, baudrate, timeout=TIMEOUT)
|
||||
serialPort.flush()
|
||||
cheapoScope(serialPort)
|
||||
Reference in New Issue
Block a user